SPECIFICATIONS

 

Brand Name: NoEnName_Null

 

Model Number: Photo Paper Rolling Cutter

Material: ALLOY

 

 

 

The hob adopts automatic paper weighting design, self-grinding roller blade and grinding tool body, which makes the hob automatically sharpen and durable. The cutting size is in centimeters and inches, convenient, fast, safe and practical. Avoid paper transfer and paper feed. The finished product has no burrs, which is an effect that ordinary cutters cannot achieve. It can cut a variety of photographic papers without sharpening the tool or changing the blade regularly. Film, hot and cold paper, art paper cardboard, office paper, thin plastic soft board, rubber soft board, copper treasure, aluminum, PVC, etc.

 

 

Parameter:

 

Model: 36 inches

 

Cutting: 91CM

 

Discretion: 1 mm

 

Cutting table: 120 * 33cm

 

The blade is sharp, not only can cut ten copies at a time. PVC cards are also easily cut off.

 

Feature:

 

* Adopting automatic paper-weight design, self-grinding roller makes the hob automatically sharpen in use and durable.

 

* Cutting dimensions are expressed in centimeters and inches. Cutting is more accurate, convenient, fast, safe and practical.

 

* Paper transfer and paper feeding, the finished product is free of burrs, ordinary cutting tools can not achieve cutting accuracy, linear performance and trimming smoothness.

 

Uses: Hob is an indispensable tool for cutting all kinds of photographic paper, film, art cardboard, hot and cold crepe paper, thin plastic sheets and thin copper. Widely used in photography studios, photography museums, big head shops and related office space.

 

Precautions:

 

1. When cutting, the knife box should be evenly applied in the direction of the guide rod. Do not apply force in other directions.

 

2. After the work is completed, park the knife box at one end of the guide.

 

3. For safety reasons, do not touch the blade with your hand.

 

As shown in Figure 4, the blade typically does not need to be replaced, but when the blade is slotted or deformed and the blade becomes dull and unusable, the blade needs to be replaced.

 

Description:

 

1. Flatten the paper to be cut under the plexiglass ruler and prepare it on the cutting table according to the required size.

 

2. Pull the knife box from one end to the other to complete the work.

 

Note:

 

1. When cutting, the tool holder should be evenly applied in the direction of the guide rod. Do not apply force in other directions.

 

2. After completing the work, stop the knife box at one end of the guide.

 

3. For your safety, do not touch the blade with your hand.

 

4. The blade usually does not need to be replaced, but when the blade is notched or deformed and the blade is dull and unusable, the blade needs to be replaced.

 

Blade replacement steps:

 

1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, then directly flip the knife box to the outside of the table, so that the blade is in the visible position, but not too strong, so as not to guide The rod is deformed.

 

2. Use a micro screwdriver to remove the top screw (1) from the knife box, then use the wire cutter to gently pull down the shaft (8) to remove the mold (5).

 

3. Insert the special wrench into the mold hole and the round nut and turn it counterclockwise to remove the blade.

 

4. When the knife box is installed, the blade plane is close to the lower blade, and the chamfered surface of the blade should be outward.

 

This package includes:

 

1 * 36" ho